Anti-reflective glass has been widely used in many fields because of its superior optical properties and the function of reducing the reflected light on the surface. Such as monitors, camera lenses, building Windows, etc. In the manufacturing process of anti-reflective glass, the first thing is to clean the glass surface. This step is the basis for the next step, to ensure that the coating of the anti-reflective glass can be fully attached to the glass. For anti-reflective glass manufacturers, the first step in glass cleaning is important. It can not only directly affect the effect of the subsequent coating process, but also have an important impact on the final quality and service life of the product. The steps for cleaning the glass surface during the manufacture of anti-reflective glass are described in detail below.
The importance of glass surface cleaning
The manufacturing process of anti-reflection glass mainly includes three important links: substrate cleaning, coating and follow-up treatment. The cleaning of the glass substrate surface directly affects the uniformity and adhesion of the subsequent coating. If there are impurities, oil, dust or small particles on the surface of the glass, these pollutants will not only lead to a decline in the quality of the coating, but also may cause uneven coating and optical performance deterioration. It may even cause problems such as light scattering. Therefore, thorough cleaning of the glass surface is a key step to ensure the quality of anti-reflective glass.
Related Post: "Surface Cleaning During The Manufacture Of Anti-reflective Glass"
Clean glass surfaces of common contaminants
In the manufacturing process of anti-reflective glass, the surface of the glass substrate is likely to be contaminated with various contaminants. The presence of pollutants will affect the smooth progress of the coating process. Therefore, before entering the coating process, it is necessary to clean the glass surface.
Dust and particles: Dust and particles are everywhere in the air. In addition, anti-reflective glass factories are constantly producing glass, so a lot of dust particles will be produced. These impurities are easy to adhere to the surface of the glass, even if you can't see it clearly, but it does exist.
Oil and fingerprints: During processing or handling, grease or other organic substances on workers' hands can contaminate the glass surface. Even workers wearing gloves may have some residue.
Chemical residue: The production process of anti-reflective glass is likely to use solvents such as cleaning agents, which will remain on the surface of the glass.
Water stains and salts: Glass should be dried after cleaning. If it is not dried, water stains or salts left by cleaning will remain on the surface of the glass. Eventually, tiny specks form.
Steps for cleaning glass surfaces
Anti-reflective glass surface cleaning is not as simple as it sounds on the surface. This is a delicate and gradual process. The following steps are usually included:
Preliminary cleaning
The initial cleaning is to remove the visible large particles of contaminants and oil on the glass surface. This is usually done using a special glass cleaner or solvent. The specific steps are as follows:
Use compressed air to remove surface particles: First, use compressed air to blow dust and loose particles away from the surface of the glass. This can avoid scratching the glass surface in the subsequent wiping process.
Apply the cleaner: When applying the special glass cleaner, use a lint-free cloth or other cleaning tools. Fleece-free is to minimize the production of impurities. Common cleaning agents include ethanol, isopropyl alcohol, acetone and other organic solvents. They are effective at dissolving fats and organic pollutants.
Mechanical wiping: Finally, we need to gently wipe the glass surface with a dust-free cloth. Ensure that the cleaning agent can fully contact and dissolve all oil and contaminants.
Ultrasonic cleaning
In order to further remove the small particles and difficult to remove pollutants on the surface of the anti-reflective glass, the manufacture of anti-reflective glass is often cleaned using ultrasonic waves. Ultrasonic cleaning tiny bubbles generated by ultrasonic vibration can carry out microscopic impact on the glass surface. The application of ultrasonic waves can remove small stains on the surface of the glass.
Cleaning liquid: Deionized water, ethanol or other professional solvents are commonly used as cleaning liquid. Deionized water can effectively remove ion contamination, while organic solvents can remove grease.
Ultrasonic frequency: Anti-reflective glass factories usually set the frequency of ultrasonic waves in the range of 20-40kHz. The higher the frequency, the better the cleaning effect. The process is carried out in a closed container. We need to isolate all interfering substances outside the container to provide a stable environment.
Soaking and cleaning time: In order to make the ultrasonic cleaning more fully, the glass substrate needs to be soaked in the ultrasonic cleaning solution for a few minutes in advance.
Rinse with deionized water
After ultrasonic cleaning, there may be residues of solvents such as cleaning agents on the surface of the glass. In order to avoid chemical residues affecting the anti-reflective glass coating, further rinsing with ionized water is required. Deionized water can effectively remove any charged contaminants, and will not leave stains such as water stains.
High pressure spray: Through high pressure deionized water spray, can further wash away all residual substances on the glass surface.
Multiple rinses: To ensure a thorough cleaning, multiple rinses are also often performed. Until the glass surface is clean.
Drying process
As mentioned earlier, if it is not dried after cleaning, the previous steps will be wasted. Only after the anti-reflective glass surface is dried can water stains be avoided. The drying process must be carried out in a dust-free environment to prevent new contaminants from adhering to the glass surface.
Hot air drying: Usually use a clean hot air blower for rapid drying. The temperature and flow rate of the hot air are precisely controlled. In this way, the uniformity of drying can be ensured, and water marks will not be left on the glass surface.
Infrared drying: Some factories use infrared drying technology to quickly evaporate the water on the surface of the glass through infrared heat radiation.
Gas drying: Use nitrogen or dry air to dry to avoid recondensation of water vapor on the glass surface.
Plasma cleaning
For more demanding anti-reflective glass manufacturing processes, plasma cleaning technology may also be used for further purification. It is the reaction of high-energy particles produced by plasma with surface pollutants to convert organic matter into a gas for removal.
Oxygen plasma: Commonly used plasma cleaning techniques include oxygen plasma cleaning. It can effectively remove organic pollutants from the glass surface.
Surface activation: Plasma cleaning can also activate the glass surface. The adhesion of the subsequent coating material is enhanced, and the uniformity and stability of the coating are improved.
Quality control and inspection
In order to ensure that the cleanliness of the glass surface meets the coating requirements. Cleaning is followed by a rigorous test. Common detection methods include surface optical detection, droplet Angle measurement and microscope detection. Surface optical inspection can detect tiny contaminants that are invisible to the naked eye. Drop Angle measurement is to measure the contact Angle formed by water droplets on the glass surface to determine the degree of cleanliness. Generally, the smaller the contact Angle, the better the cleaning effect. Microscope measurement directly uses a high-power microscope to observe whether there are contaminants on the surface of the glass.
Sum up
The process of making anti-reflective glass is so complicated. Even the first step of cleaning the glass surface is a delicate and important process. But only if we control every step of cleaning, can we ensure that the glass surface is clean enough. This can ensure the smooth coating, and finally create a satisfactory anti-reflection glass.
Related Post: "The Difference Between Anti-reflective Glass And Anti-glare Glass"



